B877F
Category： Backhoe Loader
1, Loading bucket capacity (m3): 1 2, Rated carrying-capacity (kg): 1800 3, Maximum traction force (from engine) (kN): 82 4, Volume of excavator bucket (m3): 0.18 5, Engine power (KW): 70 6, Overall length (mm): 5917 7, Main drive type: First transmission of spiral bevel gear 8, Tyre size: 12.5-18/18.4-26 9, Steering angle (°): 55 10, Working pressure of loading system (Mpa): 22.5
leave a message now >Specifications
| 1.Parameter | ||||
| Loading bucket capacity (m3) | 1 | Minimum steering radius (outside of rear wheel) (mm) | 4118 | |
| Rated carrying-capacity (kg) | 1800 | Transverse passing radius | 5350 | |
| Maximum traction force (from engine) (kN) | 82 | Maximum breakout force（kN） | 48 | |
| Volume of excavator bucket (m3) | 0.18 | Maximum digging force (kN) | 48 | |
| Max gradeability（°） | - | Forward I(km/h) | 6 | |
| Forward Ⅱ(km/h) | 10 | Forward Ⅲ(km/h) | 20 | |
| Forward Ⅳ(km/h) | 38 | Reverse I (km/h) | 6 | |
| Reverse II(km/h) | 10 | Reverse III(km/h) | 20 | |
| Reverse IV(km/h) | 38 | - | - | |
| 2.Dimension | ||||
| Overall length (mm) | 5917 | Maximum digging radius (mm) | 5393 | |
| Overall width (mm) | 2350 | Maximum digging depth (mm) | 4303 | |
| Overall height (mm) | 3608 | Wheel track | - | |
| Vehicle width (outside of wheel) (mm) | 2265 | wheelbase（mm） | 2170 | |
| Maximum dumping height(-45°)(mm) | 2693 | Number of axles | 2 | |
| Corresponding dumping distance（-45°）(mm) | 830 | Total mass (kg) | 7900 | |
| Minimum ground clearance (mm) | 346 | - | - | |
| 3.Engine | ||||
| Engine model | YC4A105Z-T20 | Number of cylinders | 4 | |
| Engine type | In-line、 water-cooled、 four-stroke、 turbocharged、direct injection | Bore/stroke（mm） | 108/132 | |
| Engine power (KW) | 70 | min fuel consumption rate（g/kw.h） | - | |
| Rated engine speed(r/min) | 2200 | Maximum torque (N.m)/rotation speed (r/min) | 420 | |
| Displacement (ml) | 4837 | Emission standard | GB 20891-2007 China II emission | |
| 4.Transmission system | ||||
| Type of torque converter | Single-stage single-phase centripetal turbine | Torque ratio | 2.64 | |
| Oil cooling mode | Air cooling | Oil pressure of torque converter inlet（MPa） | - | |
| Oil pressure of torque converter outlet（MPa） | - | Transmission type | Synchronous shift | |
| Shifting gears | front 4 rear 4 | Gear ratio of transmission forward I | - | |
| Gear ratio of transmission forward Ⅱ | - | Gear ratio of transmission forward Ⅲ | - | |
| Gear ratio of transmission forward Ⅳ | - | Gear ratio of transmission reverse I | - | |
| Gear ratio of transmission reverse Ⅱ | - | Gear ratio of transmission reverse Ⅲ | - | |
| Gear ratio of transmission reverse Ⅳ | - | Front and rear output ratio | - | |
| Model of variable-speed pump | - | Working pressure of shifting(MPa) | 1.1-1.3 | |
| Main drive type | First transmission of spiral bevel gear | Main drive reduction ratio | 2.462/2.75 | |
| Wheel reduction type | - | hub reduction gear ratio (front / rear) | - | |
| Type of drive axle | Four-wheel drive/two-wheel drive | Tyre size | 12.5-18/18.4-26 | |
| Front tyre pressure（MPa） | 0.43±0.01 | Rear tyre pressure（MPa） | 0.22±0.01 | |
| Type of foot brake | Vacuum-assisted | Brake pressure (MPa) | - | |
| Parking brake type | Caliper disc brake | - | - | |
| 5.Steering system | ||||
| Steering type | Load-sensing full hydraulic articulated steering | Model of priority valve | VLC-60 | |
| Steering pump model | KP30.31 | Steering cylinder - bore x rod diameter x stroke | - | |
| Steering gear type | Xce145-160 | Steering angle (°) | 55 | |
| Working pressure of steering system（Mpa） | 15 | - | - | |
| 6.Loading device | ||||
| Loading work type | Parallel eight-bar linkage | Loading device: boom cylinder - bore x diameter of piston rod x stroke (mm) | 80×50×767 | |
| Turning bucket cylinder - bore x diameter of piston rod x stroke (mm) | 70×45×802 | Multi-function cylinder - Bore × Piston cylinder diameter × Stroke | - | |
| Model of loading working pump | KP30.31 | Model of loading multi-way valve | HC-D6/2 | |
| Model of loading pilot valve | - | Working pressure of loading system (Mpa) | 22.5 | |
| Bucket lift time (full load)(s) | 3.36 | Bucket fall time (no load)(s) | 1.77 | |
| Bucket dumping time (no load)(s) | 1.44 | Time sum of three items(s) | 6.6 | |
| 7.Digging device | ||||
| Excavating work type | - | Excavating device: boom cylinder - bore x diameter of piston rod x stroke (mm) | 120×60×986 | |
| Stick cylinder - bore × diameter of piston rod × stroke (mm) | 110×60×753 | Bucket cylinder - bore × diameter of piston rod × stroke (mm) | 90×60×712 | |
| Slewing cylinder - bore x diameter of piston rod x stroke (mm) | 100×60×245 | Outlet Cylinder - Bore × Piston Rod Diameter × Stroke (mm) | - | |
| Telescopic arm cylinder - cylinder diameter × piston rod diameter × travel | - | Model of excavating working pump | KP30.31 | |
| Model of excavating multi-way valve | HC-D6/3+HC-DVS106/3 | Model of excavating pilot valve | - | |
| Working pressure of excavating system (MPa) | Mining 22.5 / turning 24 | Excavating work cycle time (s) | - | |
| 8.Fuel charge | ||||
| Fuel filling capacity（L） | 135 | Oil filling capacity of axles (main drive and wheel reducer)（L） | 7.5+0.8*2/15 | |
| Hydraulic oil filling capacity（L） | 165 | Engine oil filling capacity（L） | 11 | |
| Transmission oil filling capacity（L） | 20 | Oil filling capacity of braking system（L） | 2 | |
Benefits & Features
1, Rated Engine Power: The engine model YC4A105Z-T20 delivers a robust 70 kW, ensuring strong performance for heavy-duty operations.
2, Maximum Traction and Breakout Force: With a maximum traction force of 82 kN and a breakout force of 48 kN, the machine is capable of handling challenging terrain and heavy loads.
3, High Forward and Reverse Speeds: The machine offers multiple speed options, with a highest forward speed of 38 km/h and reverse speed of 38 km/h, enhancing operational efficiency.
4, Large Loading Bucket Capacity: A 0.18 m³ bucket capacity allows for significant material handling, increasing productivity in loading tasks.
5, Versatile Steering System: The load-sensing full hydraulic articulated steering offers a steering angle of 55° and a minimum steering radius of 4118 mm, providing excellent maneuverability.
6, Efficient Transmission System: A synchronous shift transmission with front 4 rear 4 gears and a main drive reduction ratio of 2.462/2.75 ensures smooth and efficient power transfer.
7, Four-Wheel Drive/Two-Wheel Drive Capability: The machine is equipped with a four-wheel drive/two-wheel drive system, enhancing its versatility and adaptability to different working conditions.
8, High Engine Torque: The engine provides a maximum torque of 420 N.m at 2200 r/min, contributing to its powerful performance.
9, Comprehensive Safety Features: The vacuum-assisted foot brake and caliper disc parking brake ensure reliable safety during operation.
10, Large Fuel and Hydraulic Oil Capacities: With a fuel filling capacity of 135 L and hydraulic oil capacity of 165 L, the machine offers extended operation times between refuels.
RELATED PRODUCTS
ONLINE MESSAGE
* Note: Please be sure to fill in the information accurately and keep the communication open. We will get in touch with you as soon as possible
Warehouse: No:124 A7 lunda International city Hedong DIstrict Linyi CHINA FACTORY:100# The East of the Crossing of VOLVO Str& SDLG Str Linyi Shandong PR.CHINA
Headquarters: A1402 Kaiyuanshangcheng,Lanshan District,Linyi City Shandong Province,PR. China 276000