L918H
Category： Wheel loader
1, Rated bucket capacity: 1.0 2, Rated carrying-capacity (kg): 1800 3, Maximum traction force (kN): ≥56 4, Engine power (KW): 58 5, Transmission type: Counter-shaft power shift 6, Main drive reduction ratio: 4.625 7, Wheel reduction ratio: 4.875 8, Steering angle (°): 35 9, Working pressure of working device hydraulic system: 17.5 10, Bucket lift time (full load): ≤4.8
leave a message now >Specifications
| 1.Parameter | ||||
| Rated bucket capacity | 1.0 | Minimum steering radius (outside of rear wheel) | 4460 | |
| Rated carrying-capacity (kg) | 1800 | Transverse passing radius (outside of bucket) | 5082 | |
| Maximum traction force (kN) | ≥56 | Altitude (m) | 2000 | |
| Tipping load | ≥36 | Environmental temperature (℃) | -25～45 | |
| Maximum breakout force | ≥58 | Water wading depth (mm) | 450 | |
| Forward I | 0～10 | Forward Ⅱ(km/h) | 0～26.5 | |
| Forward Ⅲ(km/h) | - | Forward Ⅳ(km/h) | - | |
| Reverse I (km/h) | 0～9.6 | Reverse II | 0～25 | |
| Reverse III | - | Reverse IV | - | |
| 2.Dimension | ||||
| Overall length (mm) | 5790 | Overall width (mm) | 2150 | |
| Outside width of wheel | 2040 | Wheel track | - | |
| Overall height (mm) | 2920 | wheelbase（mm） | 2260 | |
| Dumping angle | -45 | Maximum dumping height | 2510 | |
| Number of axles | 2 | Corresponding dump reach | 920 | |
| Maximum lifting height of fork horizontal section (mm) | - | Total mass (kg) | 6490 | |
| Minimum ground clearance | 290 | Axis pin at maximum lift height | 3200 | |
| Wheelbase (front/rear) (mm) | 2260(946/1314) | - | - | |
| 3.Engine | ||||
| Engine model/Drive Motor Model | YC4D80-T20 | Number of cylinders | 4 | |
| Engine type | In-line、 water-cooled、 four-stroke、 direct injection | Bore/stroke | 108/115 | |
| Engine power (KW) | 58 | Minimum fuel consumption | ≤230 | |
| Rated engine speed | 2400 | Maximum torque (N.m)/rotation speed (r/min) | 325/(1600～1800) | |
| Displacement (ml) | 4214 | Emission standard | GB20891 (National II) | |
| 4.Transmission system | ||||
| Type of torque converter | Single-stage three-element single turbine torque converter | Torque ratio | 3.43 | |
| Oil cooling mode | Air cooling | Oil pressure of torque converter inlet | 0.5～0.6 | |
| Oil pressure of torque converter outlet | 0.2～0.3 | Transmission type | Counter-shaft power shift | |
| Shifting gears | forward 2 reverse 2 | Gear ratio of forward I | 2.154 | |
| Gear ratio of forward Ⅱ | 0.768 | Gear ratio of forward Ⅲ | - | |
| Gear ratio of forward Ⅳ | - | Gear ratio of reverse I | 2.207 | |
| Gear ratio of reverse II | 0.785 | Gear ratio of reverse III | - | |
| Gear ratio of reverse IV | - | Model of variable-speed pump | CB-FA25-FL-X | |
| Working pressure of shifting | 1.1～1.5 | Main drive type | First reduction of spiral bevel gear | |
| Main drive reduction ratio | 4.625 | Wheel reduction type | One-stage planetary reduction | |
| Wheel reduction ratio | 4.875 | Drive type | CHANGCHAI four-wheel drive | |
| Tyre size | 16/70-20 | Front tyre pressure | 0.32±0.01 | |
| Rear tyre pressure | 0.28±0.01 | Type of foot brake | Air-over-oil caliper disc brake | |
| Brake pressure (MPa) | 0.784 | Parking brake type | Manual internal expansion shoe brake | |
| 5.Steering system | ||||
| Type of steering system | Load-sensing full hydraulic articulated steering | Model of priority valve | VLH-150 | |
| Steering pump model | CBGj2050/1010-XF | Steering cylinder - bore x rod diameter x stroke | HSGL-63×35×300 | |
| Steering gear model | BZZ5-320A | Steering angle (°) | 35 | |
| Working pressure of steering system | 12 | - | - | |
| 6.Working equipment | ||||
| Type of working device | Hydraulic pilot control | Boom cylinder - bore × rod diameter × stroke | HSGL-90×50×640 | |
| Turning bucket cylinder - bore x rod diameter x stroke | HSGL-100×55×412 | Model of working pump | CBGj2050/1010-XF | |
| Displacement of working pump (ml/r) | - | Model of multi-way valve | ZL20DYL1-02 | |
| Model of pilot valve | - | Working pressure of working device hydraulic system | 17.5 | |
| Bucket lift time (full load) | ≤4.8 | Bucket fall time (no load) | ≤3.2 | |
| Bucket dumping time (no load) | ≤1.1 | Time sum of three items | ≤9.1 | |
| 7. Oil filling amount | ||||
| Diesel filling capacity of fuel tank | 120 | Oil filling capacity of axles (main drive and wheel reducer) | 2×10 | |
| Oil tank filling capacity | 93 | Engine oil filling capacity | 13 | |
| Transmission oil filling capacity | 24 | Refueling of antifreeze coolant | 15 | |
| Oil filling capacity of braking system | 4 | - | - | |
Benefits & Features
1, Rated Bucket Capacity: The loader has a substantial rated bucket capacity of 1.0 cubic meters, suitable for handling large volumes of material efficiently.
2, Maximum Traction Force: With a minimum traction force of 56 kN, this loader is designed to provide exceptional pulling power for challenging tasks.
3, Engine Power: Equipped with a powerful YC4D80-T20 engine delivering 58 kW, the loader ensures high performance and productivity.
4, Forward and Reverse Speeds: The loader offers a range of speeds with forward I at 0-10 km/h and forward II at 0-26.5 km/h, along with reverse I at 0-9.6 km/h and reverse II at 0-25 km/h, providing versatility in movement.
5, Environmental Adaptability: The loader is rated to operate in environmental temperatures ranging from -25 to 45 degrees Celsius, showcasing its robustness in various climates.
6, Maximum Lifting Height: The loader has a maximum dumping height of 2510 mm, allowing it to dump materials at significant heights.
7, Transmission System: A counter-shaft power shift transmission with a single-stage three-element single turbine torque converter ensures smooth gear changes and efficient power delivery.
8, Hydraulic Pilot Control: The loader is equipped with hydraulic pilot control for the working device, enhancing precision and control during operation.
9, Wheel Reduction Ratio: A one-stage planetary reduction with a wheel reduction ratio of 4.875 contributes to the loader's stability and traction capabilities.
10, Tyre Size and Pressure: With 16/70-20 tyre size and specified front and rear tyre pressures, the loader offers optimal ground contact and pressure distribution for various terrains.
RELATED PRODUCTS
ONLINE MESSAGE
* Note: Please be sure to fill in the information accurately and keep the communication open. We will get in touch with you as soon as possible
Warehouse: No:124 A7 lunda International city Hedong DIstrict Linyi CHINA FACTORY:100# The East of the Crossing of VOLVO Str& SDLG Str Linyi Shandong PR.CHINA
Headquarters: A1402 Kaiyuanshangcheng,Lanshan District,Linyi City Shandong Province,PR. China 276000