L916H
Category： Wheel loader
1, Rated bucket capacity: 0.8m3 2, Rated carrying-capacity (kg): 1600 3, Maximum traction force (kN): ≥50kN 4, Forward IV(km/h): 0～33 km/h 5, Overall length (mm): 5765 6, Engine power (KW): 61.8 7, Transmission type: Counter-shaft power shift 8, Main drive reduction ratio: 6.167 9, Tyre size: 16/70-20 10, Working pressure of working device hydraulic system: 18 MPa
leave a message now >Specifications
| 1.Parameter | ||||
| Rated bucket capacity | 0.8m3 | Minimum steering radius (outside of rear wheel) | 4490 mm | |
| Rated carrying-capacity (kg) | 1600 | Transverse passing radius (outside of bucket) | 5080 mm | |
| Maximum traction force (kN) | ≥50kN | Altitude (m) | 2000 | |
| Tipping load | ≥30 kN | Environmental temperature (℃) | -25~45 | |
| Maximum breakout force | 47 kN | Water wading depth (mm) | 400 | |
| Forward I | 0～7 km/h | Forward Ⅱ(km/h) | 0～13 km/h | |
| Forward Ⅲ(km/h) | 0～19 km/h | Forward Ⅳ(km/h) | 0～33 km/h | |
| Reverse I (km/h) | 0～7 km/h | Reverse II | 0～13 km/h | |
| Reverse III | 0～19 km/h | Reverse IV | 0～32 km/h | |
| 2.Dimension | ||||
| Overall length (mm) | 5765 | Overall width (mm) | 2080 | |
| Outside width of wheel | 2060 mm | Wheel track | - | |
| Overall height (mm) | 2925 | wheelbase（mm） | 2235 | |
| Dumping angle | -45° | Maximum dumping height | 2455mm | |
| Number of axles | 2 | Corresponding dump reach | 865 mm | |
| Maximum lifting height of fork horizontal section (mm) | - | Total mass (kg) | 5250 | |
| Minimum ground clearance | 330mm | Axis pin at maximum lift height | 3080 mm | |
| Wheelbase (front/rear) (mm) | 2235(745/1490) | - | - | |
| 3.Engine | ||||
| Engine model/Drive Motor Model | YN4EZ080-30CR | Number of cylinders | 4 | |
| Engine type | In-line、 water-cooled、 four-stroke、 direct injection | Bore/stroke | 102/115mm | |
| Engine power (KW) | 61.8 | Minimum fuel consumption | 220g/kw.h | |
| Rated engine speed | 2400 r/min | Maximum torque (N.m)/rotation speed (r/min) | 291/1500～1800 | |
| Displacement (ml) | 3800 | Emission standard | GB 20891-2014（China Ⅲ emission） | |
| 4.Transmission system | ||||
| Type of torque converter | Single-stage three-element single turbine torque converter | Torque ratio | 3.11 | |
| Oil cooling mode | Water cooling | Oil pressure of torque converter inlet | 0.4 | |
| Oil pressure of torque converter outlet | 0.2～0.3 | Transmission type | Counter-shaft power shift | |
| Shifting gears | forward 4 reverse 4 | Gear ratio of forward I | 2.571 | |
| Gear ratio of forward Ⅱ | 1.321 | Gear ratio of forward Ⅲ | 0.959 | |
| Gear ratio of forward Ⅳ | 0.493 | Gear ratio of reverse I | 2.628 | |
| Gear ratio of reverse II | 1.351 | Gear ratio of reverse III | 0.981 | |
| Gear ratio of reverse IV | 0.504 | Model of variable-speed pump | CBGj0025A | |
| Working pressure of shifting | 1.2～1.5 MPa | Main drive type | First reduction of spiral bevel gear | |
| Main drive reduction ratio | 6.167 | Wheel reduction type | One-stage planetary reduction | |
| Wheel reduction ratio | 4.28 | Drive type | CHANGCHAI four-wheel drive | |
| Tyre size | 16/70-20 | Front tyre pressure | 0.32±0.01 | |
| Rear tyre pressure | 0.28±0.01 | Type of foot brake | Air-over-oil caliper disc brake | |
| Brake pressure (MPa) | 0.784 MPa | Parking brake type | Manual internal expansion shoe brake | |
| 5.Steering system | ||||
| Type of steering system | Load-sensing full hydraulic articulated steering | Model of priority valve | VLE-150-16 | |
| Steering pump model | CBAp2040 | Steering cylinder - bore x rod diameter x stroke | HSGL-50×30×295 mm | |
| Steering gear model | BZZ5-E250B | Steering angle (°) | 35° | |
| Working pressure of steering system | 16 MPa | - | - | |
| 6.Working equipment | ||||
| Type of working device | Mechanical control | Boom cylinder - bore × rod diameter × stroke | HSGL-80×50×582 mm | |
| Turning bucket cylinder - bore x rod diameter x stroke | HSGL-90×55×413 mm | Model of working pump | working with steering system | |
| Displacement of working pump (ml/r) | 40 | Model of multi-way valve | DL15-2-17 | |
| Model of pilot valve | - | Working pressure of working device hydraulic system | 18 MPa | |
| Bucket lift time (full load) | ≤4.9 s | Bucket fall time (no load) | ≤2.6 s | |
| Bucket dumping time (no load) | ≤0.8 s | Time sum of three items | ≤8.3 s | |
| 7. Oil filling amount | ||||
| Diesel filling capacity of fuel tank | 90L | Oil filling capacity of axles (main drive and wheel reducer) | 2×9 L | |
| Oil tank filling capacity | 52 L | Engine oil filling capacity | 7.5 L | |
| Transmission oil filling capacity | 20 L | Refueling of antifreeze coolant | 20 | |
| Oil filling capacity of braking system | 4L | - | - | |
Benefits & Features
-
Rated Bucket Capacity: With a 0.8m³ bucket capacity, the machine is designed to handle substantial loads efficiently in various working conditions.
-
Engine Power: The 4-cylinder, water-cooled engine delivers a robust 61.8kW of power, ensuring strong performance across a range of tasks.
-
Traction Force: The machine boasts a maximum traction force of ≥50kN, providing excellent pulling power for challenging terrains and heavy-duty applications.
-
Transmission System: A counter-shaft power shift with 4 forward and 4 reverse gears allows for versatile operation and smooth shifting between speeds.
-
Variable Speeds: Offering multiple forward and reverse speed ranges, from 0～7 km/h to 0～33 km/h, the machine adapts to different working environments and speeds.
-
High Altitude Operation: Capable of operating at altitudes up to 2000m, the machine is suitable for high-altitude construction and mining projects.
-
Environmentally Resistant: Designed to withstand a wide range of environmental temperatures from -25℃ to 45℃, the machine can operate effectively in various climates.
-
Water Wading Capability: The 400mm water wading depth allows the machine to work in wet conditions and cross shallow water bodies.
-
Advanced Steering System: The load-sensing full hydraulic articulated steering system provides a 35° steering angle, enhancing maneuverability and control.
-
Working Equipment Efficiency: The working device hydraulic system operates at 18 MPa, enabling fast bucket lift times of ≤4.9 seconds under full load, contributing to increased productivity.
RELATED PRODUCTS
ONLINE MESSAGE
* Note: Please be sure to fill in the information accurately and keep the communication open. We will get in touch with you as soon as possible
Warehouse: No:124 A7 lunda International city Hedong DIstrict Linyi CHINA FACTORY:100# The East of the Crossing of VOLVO Str& SDLG Str Linyi Shandong PR.CHINA
Headquarters: A1402 Kaiyuanshangcheng,Lanshan District,Linyi City Shandong Province,PR. China 276000