L956FH
Category： Wheel loader
1, Rated bucket capacity：3.2m3 2, Maximum traction force (kN)：165 kN 3, Engine power (KW)：162 4, Transmission type：Planetary power shift 5, Main drive reduction ratio：4.625 6, Wheel reduction ratio：4.94 7, Working pressure of shifting：1.1～1.5 MPa 8, Steering angle (°)：38° 9, Working pressure of steering system：16 MPa 10, Bucket lift time (full load)：≤5.7s
leave a message now >Specifications
| 1.Parameter | ||||
| Rated bucket capacity | 3.2m3 | Minimum steering radius (outside of rear wheel) | 5890mm | |
| Rated carrying-capacity (kg) | 5400 | Transverse passing radius (outside of bucket) | 6910 mm | |
| Maximum traction force (kN) | 165 kN | altitude | - | |
| Tipping load | ≥110 kN | ambient temperature | - | |
| Maximum breakout force | ≥175kN | wading depth | - | |
| Forward I | 0~13 km/h | Forward Ⅱ(km/h) | 0~38km/h | |
| Forward Ⅲ(km/h) | - | Forward Ⅳ(km/h) | - | |
| Reverse I (km/h) | 0~17 km/h | Reverse II | - | |
| Reverse III | - | Reverse IV | - | |
| 2.Dimension | ||||
| Overall length (mm) | 8320 | Overall width (mm) | 3024 | |
| Outside width of wheel | 2785 mm | Wheel track | - | |
| Overall height (mm) | 3380 | wheelbase（mm） | 3300 | |
| Dumping angle | -45° | Maximum dumping height | 3150 mm | |
| Number of axles | 2 | Corresponding dump reach | 1200mm | |
| Maximum lifting height of fork horizontal section (mm) | - | Total mass (kg) | 17250 | |
| Minimum ground clearance | 420 mm | Axis pin at maximum lift height | 4205 | |
| Wheelbase (front/rear) (mm) | - | - | - | |
| 3.Engine | ||||
| Engine model | WD10G220E23 | Number of cylinders | 6 | |
| Engine type | In-line、water-cooled 、direct injection、dry sleeve | Bore/stroke | 126/130 mm | |
| Engine power (KW) | 162 | Minimum fuel consumption | ≤215g/kw.h | |
| Rated engine speed | 2000 r/min | Maximum torque (N.m)/rotation speed (r/min) | 986/1500 | |
| Displacement (ml) | 9726 | Emission standard | GB 20891-2007 China II emission | |
| 4.Transmission system | ||||
| Type of torque converter | Single-stage four-element twin turbine torque converter | Torque ratio | 4.19 | |
| Oil cooling mode | Circulating water cooling | Oil pressure of torque converter inlet | 0.5~0.6MPa | |
| Oil pressure of torque converter outlet | 0.21~0.26MPa | Transmission type | Planetary power shift | |
| Shifting gears | forward 2 reverse 1 | Gear ratio of forward I | 2.653 | |
| Gear ratio of forward Ⅱ | 0.712 | Gear ratio of forward Ⅲ | - | |
| Gear ratio of forward Ⅳ | - | Gear ratio of reverse I | 1.941 | |
| Gear ratio of reverse II | - | Gear ratio of reverse III | - | |
| Gear ratio of reverse IV | - | Model of variable-speed pump | LGB03-BSB-A | |
| Working pressure of shifting | 1.1～1.5 MPa | Main drive type | First reduction of spiral bevel gear | |
| Main drive reduction ratio | 4.625 | Wheel reduction type | One-stage planetary reduction | |
| Wheel reduction ratio | 4.94 | Drive type | CHANGCHAI four-wheel drive | |
| Tyre size | 23.5-25 | Front tyre pressure | 0.39±0.01 MPa | |
| Rear tyre pressure | 0.33±0.01 MPa | Type of foot brake | Air-over-oil caliper disc brake | |
| Brake pressure (MPa) | 0.784 MPa | Parking brake type | Electric air-controlled internal expansion shoe | |
| 5.Steering system | ||||
| Type of steering system | Load-sensing full hydraulic articulated steering | Model of priority valve | VLH-240S-16 | |
| Steering pump model | HPT3-125/P124-10 | Steering cylinder - bore x rod diameter x stroke | HSGL-90*50*480 mm | |
| Steering gear model | Xcel80-1000 | Steering angle (°) | 38° | |
| Working pressure of steering system | 16 MPa | - | - | |
| 6.Working equipment | ||||
| Type of working device | Hydraulic pilot control | Boom cylinder - bore × rod diameter × stroke | HSGF-170×90×757 mm | |
| Turning bucket cylinder - bore x rod diameter x stroke | HSGF-200×105×550mm | Model of working pump | JHP3160 | |
| Displacement of working pump (ml/r) | 166 | Model of multi-way valve | KM300-Ⅱ-19A | |
| Model of pilot valve | PCL403-35-B | Working pressure of working device hydraulic system | 19.5MPa | |
| Bucket lift time (full load) | ≤5.7s | Bucket fall time (no load) | ≤3.1 s | |
| Bucket dumping time (no load) | ≤1.2 s | Time sum of three items | ≤10s | |
| 7. Oil filling amount | ||||
| Diesel filling capacity of fuel tank | 300 L | Oil filling capacity of axles (main drive and wheel reducer) | 2×30 L | |
| Oil tank filling capacity | 240 L | Engine oil filling capacity | 20 L | |
| Transmission oil filling capacity | 45L | Refueling of antifreeze coolant | 45 | |
| Oil filling capacity of braking system | 4 L | - | - | |
Benefits & Features
1, Rated bucket capacity: The loader features a substantial bucket capacity of 3.2 cubic meters, suitable for heavy-duty loading tasks.
2, Maximum traction force: With a maximum traction force of 165 kN, the machine can handle challenging terrain and heavy loads effectively.
3, Forward and reverse speed options: Offering multiple speed settings, including Forward I at 0-13 km/h and Reverse I at 0-17 km/h, the loader ensures versatility in movement.
4, High engine power: The WD10G220E23 engine delivers 162 kW of power, ensuring robust performance in various working conditions.
5, Planetary power shift transmission: The use of a planetary power shift transmission enhances the efficiency and reliability of the gear shifting mechanism.
6, Hydraulic pilot control for working equipment: This feature allows for precise and responsive control of the bucket and other working equipment, improving operational flexibility.
7, Dual steering system: Equipped with a load-sensing full hydraulic articulated steering system, the loader offers a 38-degree steering angle for superior maneuverability.
8, High ground clearance: A minimum ground clearance of 420 mm allows the loader to navigate uneven terrain with ease.
9, Large tyre size: The 23.5-25 tyre size provides enhanced stability and grip, suitable for various ground conditions.
10, Comprehensive oil filling capacities: With ample capacities for diesel, engine oil, transmission oil, and other fluids, the loader is designed for extended periods of operation without frequent maintenance.
RELATED PRODUCTS
ONLINE MESSAGE
* Note: Please be sure to fill in the information accurately and keep the communication open. We will get in touch with you as soon as possible
Warehouse: No:124 A7 lunda International city Hedong DIstrict Linyi CHINA FACTORY:100# The East of the Crossing of VOLVO Str& SDLG Str Linyi Shandong PR.CHINA
Headquarters: A1402 Kaiyuanshangcheng,Lanshan District,Linyi City Shandong Province,PR. China 276000