L956FHD
Category： Wheel loader
1, Rated bucket capacity: 3.0(opt 2.7～4.5) 2, Maximum traction force: 165 kN 3, Engine power: 162 KW 4, Transmission type: Counter-shaft electric liquid shift 5, Steering system: Load-sensing full hydraulic articulated steering 6, Type of working device: Hydraulic pilot control 7, Tyre size: 23.5-25 8, Brake pressure: 0.784 MPa 9, Engine model/Drive Motor Model: WP10G220E341 10, Oil filling capacity of fuel tank: 300 L
leave a message now >Specifications
| 1.Parameter | ||||
| Rated bucket capacity | 3.0(opt 2.7～4.5) | Minimum steering radius (outside of rear wheel) | 5890mm | |
| Rated carrying-capacity (kg) | 5000 | Transverse passing radius (outside of bucket) | 6910 mm | |
| Maximum traction force (kN) | 165 kN | Altitude (m) | - | |
| Tipping load | ≥110 kN | Environmental temperature (℃) | - | |
| Maximum breakout force | ≥180kN | Water wading depth (mm) | - | |
| Forward I | 0~6.7km/h | Forward Ⅱ(km/h) | 0~12.4km/h | |
| Forward Ⅲ(km/h) | 0~25.9km/h | Forward Ⅳ(km/h) | 0~38km/h | |
| Reverse I (km/h) | 0~6.8km/h | Reverse II | 0~12.5km/h | |
| Reverse III | 0~26.1km/h | Reverse IV | 0~38.2km/h | |
| 2.Dimension | ||||
| Overall length (mm) | 8360 | Overall width (mm) | 3024 | |
| Outside width of wheel | 2785 mm | Wheel track | - | |
| Overall height (mm) | 3410 | wheelbase（mm） | 3300 | |
| Dumping angle | -45° | Maximum dumping height | 3200mm | |
| Number of axles | 2 | Corresponding dump reach | 1170 mm | |
| Maximum lifting height of fork horizontal section (mm) | - | Total mass (kg) | 17200 | |
| Minimum ground clearance | 420 mm | Axis pin at maximum lift height | 4205 | |
| Wheelbase (front/rear) (mm) | - | - | - | |
| 3.Engine | ||||
| Engine model/Drive Motor Model | WP10G220E341 | Number of cylinders | 6 | |
| Engine type | In-line、 water-cooled、 electronically controlled high-pressure common-rail、 four-valve | Bore/stroke | 126/130 mm | |
| Engine power (KW) | 162 | Minimum fuel consumption | ≤210 g/kw.h | |
| Rated engine speed | 2200 r/min | Maximum torque (N.m)/rotation speed (r/min) | 950/1400~1600 | |
| Displacement (ml) | 9726 | Emission standard | GB 20891-2014（China Ⅲ emission） | |
| 4.Transmission system | ||||
| Type of torque converter | Single-stage three-element single turbine torque converter | Torque ratio | 2.48 | |
| Oil cooling mode | Air cooling | Oil pressure of torque converter inlet | 0.8～1.0 | |
| Oil pressure of torque converter outlet | 0.57～0.69 | Transmission type | Counter-shaft electric liquid shift | |
| Shifting gears | forward 4 reverse 4 | Gear ratio of forward I | 4.325 | |
| Gear ratio of forward Ⅱ | 2.383 | Gear ratio of forward Ⅲ | 1.028 | |
| Gear ratio of forward Ⅳ | 0.650 | Gear ratio of reverse I | 4.287 | |
| Gear ratio of reverse II | 2.361 | Gear ratio of reverse III | 1.019 | |
| Gear ratio of reverse IV | 0.645 | Model of variable-speed pump | HPT2-50 | |
| Working pressure of shifting | 1.9～2.3 | Main drive type | First reduction of spiral bevel gear | |
| Main drive reduction ratio | 4.625 | Wheel reduction type | One-stage planetary reduction | |
| Wheel reduction ratio | 4.94 | Drive type | CHANGCHAI four-wheel drive | |
| Tyre size | 23.5-25 | Front tyre pressure | 0.39±0.01 MPa | |
| Rear tyre pressure | 0.33±0.01 MPa | Type of foot brake | Air-over-oil caliper disc brake | |
| Brake pressure (MPa) | 0.784 MPa | Parking brake type | Electric air-controlled caliper disc brake | |
| 5.Steering system | ||||
| Type of steering system | Load-sensing full hydraulic articulated steering | Model of priority valve | VLH-240S-16 | |
| Steering pump model | 112/10 | Steering cylinder - bore x rod diameter x stroke | HSGL-90*50*480 | |
| Steering gear model | Xcel80-1000 | Steering angle (°) | 38° | |
| Working pressure of steering system | 16 MPa | - | - | |
| 6.Working equipment | ||||
| Type of working device | Hydraulic pilot control | Boom cylinder - bore × rod diameter × stroke | HSGF-170×90×757 mm | |
| Turning bucket cylinder - bore x rod diameter x stroke | HSGF-200×105×550mm | Model of working pump | HPT3-63 | |
| Displacement of working pump (ml/r) | 63 | Model of multi-way valve | KM300-II-19A | |
| Model of pilot valve | PCL402-4MBM3H3B-C | Working pressure of working device hydraulic system | 19.5MPa | |
| Bucket lift time (full load) | ≤5.7 s | Bucket fall time (no load) | ≤3.7 s | |
| Bucket dumping time (no load) | ≤1.2 s | Time sum of three items | ≤10.6s | |
| 7. Oil filling amount | ||||
| Diesel filling capacity of fuel tank | 300 L | Oil filling capacity of axles (main drive and wheel reducer) | 2×30 L | |
| Oil tank filling capacity | 240 L | Engine oil filling capacity | 20 L | |
| Transmission oil filling capacity | 17.1/4.7L | Refueling of antifreeze coolant | 55L | |
| Oil filling capacity of braking system | 4 L | - | - | |
Benefits & Features
1, Rated Bucket Capacity: The machine boasts a rated bucket capacity of 3.0 cubic meters with an option range of 2.7 to 4.5 cubic meters, indicating versatility in handling different volumes of material.
2, Maximum Traction Force: With a maximum traction force of 165 kN, the machine is capable of handling tough terrain and heavy loads effectively.
3, Engine Power: Equipped with a powerful WP10G220E341 engine delivering 162 kW, the machine ensures high performance and efficiency.
4, Transmission System: The counter-shaft electric liquid shift transmission with 4 forward and 4 reverse gears provides a wide range of speed options for various operational conditions.
5, Engine Emission Standard: Adhering to the GB 20891-2014 (China III emission) standard, the machine is environmentally friendly and compliant with emission regulations.
6, Hydraulic Pilot Control: The hydraulic pilot control working device enhances precision and ease of operation, improving overall work efficiency.
7, Maximum Breakout Force: The machine can exert a maximum breakout force of 180kN, suitable for challenging excavation tasks.
8, Forward and Reverse Speeds: Offering multiple speed options from 0 to 38 km/h in both forward and reverse, the machine provides flexibility for different operational requirements.
9, Tyre Size and Pressure: With 23.5-25 tyres and specified front and rear tyre pressures, the machine ensures optimal traction and stability.
10, Oil Filling Amounts: The comprehensive oil filling capacities, including 300 L for diesel, 240 L for the oil tank, and 20 L for engine oil, contribute to longer operation periods between refueling and maintenance.
Prev: L956FHD-VRT
Next : L956FH
RELATED PRODUCTS
ONLINE MESSAGE
* Note: Please be sure to fill in the information accurately and keep the communication open. We will get in touch with you as soon as possible
Warehouse: No:124 A7 lunda International city Hedong DIstrict Linyi CHINA FACTORY:100# The East of the Crossing of VOLVO Str& SDLG Str Linyi Shandong PR.CHINA
Headquarters: A1402 Kaiyuanshangcheng,Lanshan District,Linyi City Shandong Province,PR. China 276000