L968F
Category： Wheel loader
1, Rated bucket capacity: 3.5（3.0-5.0） 2, Maximum traction force: 180 kN 3, Maximum breakout force: ≥210 kN 4, Forward IV: 0～38 km/h 5, Reverse IV: 0～39 km/h 6, Overall length: 8770 mm 7, Overall width: 3200 mm 8, Total mass: 19950 kg 9, Engine power: 178 KW 10, Engine model/Drive Motor Model: WD10G240E202
leave a message now >Specifications
| 1.Parameter | ||||
| Rated bucket capacity | 3.5（3.0-5.0） | Minimum steering radius (outside of rear wheel) | 6062 mm | |
| Rated carrying-capacity (kg) | 6000 | Transverse passing radius (outside of bucket) | 7140 mm | |
| Maximum traction force (kN) | 180 kN | Altitude (m) | - | |
| Tipping load | ≥128 kN | Environmental temperature (℃) | - | |
| Maximum breakout force | ≥210 kN | Water wading depth (mm) | - | |
| Forward I | 0～7.2 km/h | Forward Ⅱ(km/h) | 0～13.1 km/h | |
| Forward Ⅲ(km/h) | 0～27.5 km/h | Forward Ⅳ(km/h) | 0～38 km/h | |
| Reverse I (km/h) | 0～7.1 km/h | Reverse II | 0～13.2 km/h | |
| Reverse III | 0～27.6 km/h | Reverse IV | 0～39 km/h | |
| 2.Dimension | ||||
| Overall length (mm) | 8770 | Overall width (mm) | 3200 | |
| Outside width of wheel | 2925 mm | Wheel track | - | |
| Overall height (mm) | 3470 | wheelbase（mm） | 3400 | |
| Dumping angle | -45° | Maximum dumping height | 3250 mm | |
| Number of axles | 2 | Corresponding dump reach | 1210 mm | |
| Maximum lifting height of fork horizontal section (mm) | - | Total mass (kg) | 19950 | |
| Minimum ground clearance | 530 mm | Axis pin at maximum lift height | 4395 mm | |
| Wheelbase (front/rear) (mm) | - | - | - | |
| 3.Engine | ||||
| Engine model/Drive Motor Model | WD10G240E202 | Number of cylinders | 6 | |
| Engine type | In-line、 water-cooled、 dry sleeve、 direct injection | Bore/stroke | 126/130 mm | |
| Engine power (KW) | 178 | Minimum fuel consumption | 230 g/kw.h | |
| Rated engine speed | 2100 r/min | Maximum torque (N.m)/rotation speed (r/min) | 1000/1400 | |
| Displacement (ml) | 9726 | Emission standard | GB 20891-2007 China II emission | |
| 4.Transmission system | ||||
| Type of torque converter | Single-stage three-element torque converter | Torque ratio | 2.34 | |
| Oil cooling mode | Air cooling | Oil pressure of torque converter inlet | 0.8～1.0 MPa | |
| Oil pressure of torque converter outlet | 0.57～0.69 MPa | Transmission type | Counter-shaft electric liquid shift | |
| Shifting gears | forward 4 reverse 4 | Gear ratio of forward I | 4.625 | |
| Gear ratio of forward Ⅱ | 2.383 | Gear ratio of forward Ⅲ | 1.028 | |
| Gear ratio of forward Ⅳ | 0.650 | Gear ratio of reverse I | 4.583 | |
| Gear ratio of reverse II | 2.361 | Gear ratio of reverse III | 1.019 | |
| Gear ratio of reverse IV | 0.645 | Model of variable-speed pump | P360A367(DRPBB)ZA25-6/HPT2-50 | |
| Working pressure of shifting | 1.9～2.3 MPa | Main drive type | First reduction of spiral bevel gear | |
| Main drive reduction ratio | 4.11 | Wheel reduction type | One-stage planetary reduction | |
| Wheel reduction ratio | 5.6 | Drive type | CHANGCHAI four-wheel drive | |
| Tyre size | 26.5-25 | Front tyre pressure | 0.40±0.01 MPa | |
| Rear tyre pressure | 0.35±0.01 MPa | Type of foot brake | Air-over-oil caliper disc brake | |
| Brake pressure (MPa) | 0.7 MPa | Parking brake type | Electric air-controlled caliper disc brake | |
| 5.Steering system | ||||
| Type of steering system | Load-sensing full hydraulic articulated steering | Model of priority valve | VLH-240S-16 | |
| Steering pump model | Twin pump 112/10 | Steering cylinder - bore x rod diameter x stroke | 90×50×480 mm | |
| Steering gear model | Xcel80-1000 | Steering angle (°) | 38° | |
| Working pressure of steering system | 16 MPa | - | - | |
| 6.Working equipment | ||||
| Type of working device | Hydraulic pilot control | Boom cylinder - bore × rod diameter × stroke | 180×100×746 mm | |
| Turning bucket cylinder - bore x rod diameter x stroke | 210×110×565 mm | Model of working pump | Twin pump 100/50 | |
| Displacement of working pump (ml/r) | 100 | Model of multi-way valve | KM300-Ⅱ | |
| Model of pilot valve | PCL403-35-B | Working pressure of working device hydraulic system | 21 MPa | |
| Bucket lift time (full load) | ≤5.6 s | Bucket fall time (no load) | ≤3.5 s | |
| Bucket dumping time (no load) | ≤1.2 s | Time sum of three items | ≤10.3 s | |
| 7. Oil filling amount | ||||
| Diesel filling capacity of fuel tank | 350 L | Oil filling capacity of axles (main drive and wheel reducer) | 2×40 L | |
| Oil tank filling capacity | 220 L | Engine oil filling capacity | 20 L | |
| Transmission oil filling capacity | 19.5/4.7 L | Refueling of antifreeze coolant | 55 L | |
| Oil filling capacity of braking system | 4L | - | - | |
Benefits & Features
1, Rated Bucket Capacity: The loader has a rated bucket capacity of 3.5 cubic meters, with an adjustable range from 3.0 to 5.0 cubic meters, offering versatility in material handling.
2, Maximum Traction Force: Equipped with a maximum traction force of 180 kN, ensuring robust performance in various working conditions.
3, Engine Power: Powered by a 178 kW engine, providing ample power for heavy-duty tasks while meeting China II emission standards.
4, Transmission System: Features a counter-shaft electric liquid shift transmission with four forward and four reverse gears, allowing for versatile speed options suitable for different operational requirements.
5, Steering System: Incorporates a load-sensing full hydraulic articulated steering system for precise control and maneuverability.
6, Working Equipment: Utilizes hydraulic pilot control for the working device, enhancing operational efficiency and control.
7, Tyre Size and Pressure: Equipped with 26.5-25 tyres, with specified front tyre pressure at 0.40±0.01 MPa and rear tyre pressure at 0.35±0.01 MPa, ensuring optimal traction and stability.
8, Braking System: Includes an air-over-oil caliper disc brake for the foot brake and an electric air-controlled caliper disc brake for the parking brake, providing reliable safety features.
9, Dumping Angle and Height: The loader has a dumping angle of -45° and a maximum dumping height of 3250 mm, facilitating efficient material unloading.
10, Oil Filling Amounts: Offers substantial oil filling capacities for the fuel tank (350 L), axle oil (2×40 L), hydraulic oil tank (220 L), engine oil (20 L), and transmission oil (19.5/4.7 L), ensuring extended operational periods without frequent refills.
RELATED PRODUCTS
ONLINE MESSAGE
* Note: Please be sure to fill in the information accurately and keep the communication open. We will get in touch with you as soon as possible
Warehouse: No:124 A7 lunda International city Hedong DIstrict Linyi CHINA FACTORY:100# The East of the Crossing of VOLVO Str& SDLG Str Linyi Shandong PR.CHINA
Headquarters: A1402 Kaiyuanshangcheng,Lanshan District,Linyi City Shandong Province,PR. China 276000