L989F
Category： Wheel loader
1, Rated bucket capacity: 4.5 m3 2, Maximum traction force: 220 kN 3, Engine power (KW): 251 4, Transmission type: Counter-shaft electric liquid shift 5, Main drive reduction ratio: 4.25 6, Steering system: Load-sensing full hydraulic articulated steering 7, Type of working device: Hydraulic pilot control 8, Working pressure of working device hydraulic system: 28 MPa 9, Diesel filling capacity of fuel tank: 380 L 10, Engine oil filling capacity: 41 L
leave a message now >Specifications
| 1.Parameter | ||||
| Rated bucket capacity | 4.5 m3 | Minimum steering radius (outside of rear wheel) | 6390 mm | |
| Rated carrying-capacity (kg) | 8000 | Transverse passing radius (outside of bucket) | 7660 mm | |
| Maximum traction force (kN) | 220 kN | altitude | - | |
| Tipping load | ≥160 kN | ambient temperature | - | |
| Maximum breakout force | ≥230 kN | wading depth | - | |
| Forward I | 0～6.7 km/h | Forward Ⅱ(km/h) | 0～12.4 km/h | |
| Forward Ⅲ(km/h) | 0～24.8 km/h | Forward Ⅳ(km/h) | 0～36 km/h | |
| Reverse I (km/h) | 0～6.7 km/h | Reverse II | 0～12.4 km/h | |
| Reverse III | 0～24.8 km/h | Reverse IV | 0～36 km/h | |
| 2.Dimension | ||||
| Overall length (mm) | 9400 | Overall width (mm) | 3490 | |
| Outside width of wheel | 3170 mm | Wheel track | - | |
| Overall height (mm) | 3725 | wheelbase（mm） | 3550 | |
| Dumping angle | -45° | Maximum dumping height | 3650 mm | |
| Number of axles | 2 | Corresponding dump reach | 1390 mm | |
| Maximum lifting height of fork horizontal section (mm) | - | Total mass (kg) | 27500 | |
| Minimum ground clearance | 566 mm | Axis pin at maximum lift height | 4795 | |
| Wheelbase (front/rear) (mm) | - | - | - | |
| 3.Engine | ||||
| Engine model/Drive Motor Model | SD130B | Number of cylinders | 6 | |
| Engine type | In-line、 water-cooled、turbocharged 、electronically controlled | Bore/stroke | 131/158 mm | |
| Engine power (KW) | 251 | Minimum fuel consumption | ≤220 g/kw.h | |
| Rated engine speed | 2100 r/min | Maximum torque (N.m)/rotation speed (r/min) | 1540/1400 | |
| Displacement (ml) | 12777 | Emission standard | GB 20891-2014（China Ⅲ emission） | |
| 4.Transmission system | ||||
| Type of torque converter | Single-stage three-element single turbine torque converter | Torque ratio | 2.47 | |
| Oil cooling mode | Air cooling | Oil pressure of torque converter inlet | 0.6 MPa | |
| Oil pressure of torque converter outlet | 0.3 MPa | Transmission type | Counter-shaft electric liquid shift | |
| Shifting gears | forward 4 reverse 4 | Gear ratio of forward I | 4.77 | |
| Gear ratio of forward Ⅱ | 2.51 | Gear ratio of forward Ⅲ | 1.19 | |
| Gear ratio of forward Ⅳ | 0.74 | Gear ratio of reverse I | 4.77 | |
| Gear ratio of reverse II | 2.51 | Gear ratio of reverse III | 1.19 | |
| Gear ratio of reverse IV | 0.74 | Model of variable-speed pump | Built-in transmission | |
| Working pressure of shifting | 1.5～1.8 MPa | Main drive type | First reduction of spiral bevel gear | |
| Main drive reduction ratio | 4.25 | Wheel reduction type | One-stage planetary reduction | |
| Wheel reduction ratio | 5.33 | Drive type | Tubeless tyres | |
| Tyre size | 29.5-25 | Front tyre pressure | 0.50±0.01 MPa | |
| Rear tyre pressure | 0.39±0.01 MPa | Type of foot brake | Full hydraulic wet brake | |
| Brake pressure (MPa) | 8 MPa（oil press） | Parking brake type | Pressure-releasing caliper disc brake | |
| 5.Steering system | ||||
| Type of steering system | Load-sensing full hydraulic articulated steering | Model of priority valve | VLH-240 | |
| Steering pump model | A10V0110+AZPF16 | Steering cylinder - bore x rod diameter x stroke | HSGL-100×60×432-918 mm | |
| Steering gear model | BZZ8-1182 | Steering angle (°) | 38° | |
| Working pressure of steering system | 21 MPa | - | - | |
| 6.Working equipment | ||||
| Type of working device | Hydraulic pilot control | Boom cylinder - bore × rod diameter × stroke | HSGF-170×100×861-1460 mm | |
| Turning bucket cylinder - bore x rod diameter x stroke | HSGF-200×110×564-1138 mm | Model of working pump | A10V0110 | |
| Displacement of working pump (ml/r) | 110 | Model of multi-way valve | M6-1452-30/3M6-22H | |
| Model of pilot valve | 4THF6E | Working pressure of working device hydraulic system | 28 MPa | |
| Bucket lift time (full load) | ≤5.7 s | Bucket fall time (no load) | ≤4.2 s | |
| Bucket dumping time (no load) | ≤1.4 s | Time sum of three items | ≤11.3 s | |
| 7. Oil filling amount | ||||
| Diesel filling capacity of fuel tank | 380 L | Oil filling capacity of axles (main drive and wheel reducer) | 46+59 L | |
| Oil tank filling capacity | 365 L | Engine oil filling capacity | 41 L | |
| Transmission oil filling capacity | 55 L | Refueling of antifreeze coolant | 55L | |
| Oil filling capacity of braking system | - | - | - | |
Benefits & Features
1, Rated Bucket Capacity: The machine boasts a substantial rated bucket capacity of 4.5 cubic meters, enabling it to handle large volumes of materials efficiently.
2, Maximum Traction Force: With a maximum traction force of 220 kN, the equipment is capable of performing in challenging conditions and heavy-duty applications.
3, Engine Power: The engine, model SD130B, delivers a powerful 251 KW, ensuring robust performance and high productivity on the worksite.
4, Transmission System: Equipped with a counter-shaft electric liquid shift transmission featuring 4 forward and 4 reverse gears, the machine offers versatile speed options for various operational requirements.
5, Torque Converter: A single-stage three-element single turbine torque converter with a torque ratio of 2.47 enhances the machine's power delivery and responsiveness.
6, Hydraulic Pilot Control: The hydraulic pilot control for the working device ensures precise and smooth operation, crucial for accurate and efficient material handling.
7, High Forward and Reverse Speeds: The machine can reach a top speed of 36 km/h in both forward and reverse, allowing for quick movement across the worksite.
8, Large Engine Displacement: A large engine displacement of 12777 ml contributes to the powerful performance and ability to handle heavy loads.
9, Tyre Size and Pressure: The machine is fitted with 29.5-25 tubeless tyres, which are designed for durability and stability, with specified front tyre pressure at 0.50±0.01 MPa and rear tyre pressure at 0.39±0.01 MPa for optimal performance.
10, Oil Filling Capacities: Ample oil filling capacities for the diesel fuel tank (380 L), axle oil (46+59 L), hydraulic oil tank (365 L), engine oil (41 L), and transmission oil (55 L) ensure extended periods of operation without frequent refueling.
RELATED PRODUCTS
ONLINE MESSAGE
* Note: Please be sure to fill in the information accurately and keep the communication open. We will get in touch with you as soon as possible
Warehouse: No:124 A7 lunda International city Hedong DIstrict Linyi CHINA FACTORY:100# The East of the Crossing of VOLVO Str& SDLG Str Linyi Shandong PR.CHINA
Headquarters: A1402 Kaiyuanshangcheng,Lanshan District,Linyi City Shandong Province,PR. China 276000