L989H
Category： Wheel loader
1，Bucket capacity range：4.5 m3(3.5~7.0) 2，Rated carrying-capacity：8000 kg 3，Maximum traction force：220 kN 4，Engine power：250 KW 5，Engine type：In-line, water-cooled, dry sleeve, direct injection 6，Transmission type：Counter-shaft electric liquid shift 7，Main drive reduction ratio：4.25 8，Steering system type：Load-sensing full hydraulic articulated steering 9，Working pressure of working device hydraulic system：28 MPa 10，Bucket lift time (full load)：≤5.7 s
leave a message now >Specifications
| 1.Parameter | ||||
| Bucket capacity range (m3) | 4.5 m3(3.5~7.0) | Minimum steering radius (outside of rear wheel) | 6390 mm | |
| Rated carrying-capacity (kg) | 8000 | Transverse passing radius (outside of bucket) | 7660 mm | |
| Maximum traction force (kN) | 220 kN | Altitude（m） | 4000 | |
| Tipping load | ≥160 kN | Ambient temperature（℃） | -25~45 | |
| Maximum breakout force | ≥230 kN | Wading depth（mm） | 760 | |
| Forward I | 0～6.7 km/h | Forward Ⅱ(km/h) | 0～12.4 km/h | |
| Forward Ⅲ(km/h) | 0～24.8 km/h | Forward Ⅳ(km/h) | 0～36 km/h | |
| Reverse I (km/h) | 0～6.7 km/h | Reverse II | 0～12.4 km/h | |
| Reverse III | 0～24.8 km/h | Reverse IV | 0～36 km/h | |
| 2.Dimension | ||||
| Overall length (mm) | 9400 | Overall width (mm) | 3490 | |
| Outside width of wheel | 3170 mm | Wheel track | - | |
| Overall height (mm) | 3725 | wheelbase（mm） | 3550 | |
| Dumping angle | -45° | Maximum dumping height | 3650 mm | |
| Number of axles | 2 | Corresponding dump reach | 1390 mm | |
| Max. lifting height of fork horizontal section (mm) | - | Total mass (kg) | 27500 | |
| Minimum ground clearance | 566 mm | Axis pin at maximum lift height | 4795 | |
| wheelbase(front /rear)（mm） | 3550(1775/1775) | - | - | |
| 3.Engine | ||||
| Engine model/Drive Motor Model | WP12G340E311 | Number of cylinders | 6 | |
| Engine type | In-line、 water-cooled、 dry sleeve、 direct injection | Bore/stroke | 126/155 mm | |
| Engine power (KW) | 250 | Minimum fuel consumption | ≤215 g/kw.h | |
| Rated engine speed | 2100 r/min | Maximum torque (N.m)/rotation speed (r/min) | 1800/1400 | |
| Displacement (ml) | 11596 | Emission standard | GB 20891-2014（China Ⅲ emission） | |
| 4.Transmission system | ||||
| Type of torque converter | Single-stage three-element single turbine torque converter | Torque ratio | 2.47 | |
| Oil cooling mode | Air cooling | Oil pressure of torque converter inlet | 0.6 MPa | |
| Oil pressure of torque converter outlet | 0.3 MPa | Transmission type | Counter-shaft electric liquid shift | |
| Shifting gears | forward 4 reverse 4 | Gear ratio of forward I | 4.77 | |
| Gear ratio of forward Ⅱ | 2.51 | Gear ratio of forward Ⅲ | 1.19 | |
| Gear ratio of forward Ⅳ | 0.74 | Gear ratio of reverse I | 4.77 | |
| Gear ratio of reverse II | 2.51 | Gear ratio of reverse III | 1.19 | |
| Gear ratio of reverse IV | 0.74 | Model of variable-speed pump | Built-in transmission | |
| Working pressure of shifting | 1.5～1.8 MPa | Main drive type | First reduction of spiral bevel gear | |
| Main drive reduction ratio | 4.25 | Wheel reduction type | One-stage planetary reduction | |
| Wheel reduction ratio | 5.33 | Drive type | Tubeless tyres | |
| Tyre size | 29.5-25 | Front tyre pressure | 0.45±0.01 MPa | |
| Rear tyre pressure | 0.39±0.01 MPa | Type of foot brake | Full hydraulic wet brake | |
| Brake pressure (MPa) | 8 MPa | Parking brake type | Pressure-releasing caliper disc brake | |
| 5.Steering system | ||||
| Type of steering system | Load-sensing full hydraulic articulated steering | Model of priority valve | VLH-240 | |
| Steering pump model | A10V0110+AZPF16 | Steering cylinder - bore x rod diameter x stroke | HSGL-100×60×432-918 mm | |
| Steering gear model | BZZ8-1182 | Steering angle (°) | 38° | |
| Working pressure of steering system | 21 MPa | - | - | |
| 6.Working equipment | ||||
| Type of working device | Double ball handle hydraulic pilot control | Boom cylinder - bore × rod diameter × stroke | HSGF-170×110×861-1460 mm | |
| Turning bucket cylinder - bore x rod diameter x stroke | HSGF-200×110×564-1138 mm | Model of working pump | A10V0110 | |
| Displacement of working pump (ml/r) | 110 | Model of multi-way valve | M6-1591-30/3M6-22H-A | |
| Model of pilot valve | 4THF6E | Working pressure of working device hydraulic system | 28 MPa | |
| Bucket lift time (full load) | ≤5.7 s | Bucket fall time (no load) | ≤4.2 s | |
| Bucket dumping time (no load) | ≤1.4 s | Time sum of three items | ≤11.3 s | |
| 7. Oil filling amount | ||||
| Diesel filling capacity of fuel tank | 380 L | Oil filling capacity of axles (main drive and wheel reducer) | 46+59 L | |
| Oil tank filling capacity | 365 L | Engine oil filling capacity | 24 L | |
| Transmission oil filling capacity | 55 L | Refueling of antifreeze coolant(L) | 55L | |
| Oil filling capacity of braking system | - | - | - | |
Benefits & Features
1，Bucket capacity range：The bucket capacity range of 4.5 m3 (3.5~7.0) indicates versatility in handling different volumes of material.
2，Rated carrying-capacity：With a rated carrying capacity of 8000 kg, it is designed to handle heavy loads efficiently.
3，Maximum traction force：A high maximum traction force of 220 kN allows for excellent pulling power in various terrains.
4，Engine power：The engine delivers a robust 250 KW, ensuring powerful performance for heavy-duty tasks.
5，Gear ratios：The transmission system features a range of gear ratios, providing flexibility for different speeds and conditions.
6，Steering system：A load-sensing full hydraulic articulated steering system offers precise control and maneuverability.
7，Working device hydraulics：The working device hydraulic system operates at 28 MPa, ensuring strong and responsive operation of the equipment.
8，Bucket operation times：Efficient operation times for the bucket, including lift, fall, and dumping, contribute to increased productivity.
9，Tire size and pressure：The 29.5-25 tire size with specified pressures ensures optimal traction and reduced ground pressure.
10，Oil filling capacities：The comprehensive oil filling capacities, including for the engine, transmission, and hydraulic systems, support extended operation without frequent refills.
RELATED PRODUCTS
ONLINE MESSAGE
* Note: Please be sure to fill in the information accurately and keep the communication open. We will get in touch with you as soon as possible
Warehouse: No:124 A7 lunda International city Hedong DIstrict Linyi CHINA FACTORY:100# The East of the Crossing of VOLVO Str& SDLG Str Linyi Shandong PR.CHINA
Headquarters: A1402 Kaiyuanshangcheng,Lanshan District,Linyi City Shandong Province,PR. China 276000