LFT26F
Category： Wheel loader
1，Rated bucket capacity：7240 2，Rated carrying-capacity：26000 kg 3，Maximum traction force：195 kN 4，Engine power：178 KW 5，Engine model/Drive Motor Model：WP10G240E341 6，Transmission type：Planetary power shift 7，Main drive reduction ratio：4.625 8，Wheel reduction ratio：5.6 9，Steering angle：35° 10，Working pressure of working device hydraulic system：21 MPa
leave a message now >Specifications
| 1.Parameter | ||||
| Rated bucket capacity | - | Minimum steering radius (outside of rear wheel) | 7240 | |
| Rated carrying-capacity (kg) | 26000 | Transverse passing radius (outside of bucket) | 7745 | |
| Maximum traction force (kN) | 195 | Altitude (m) | 3000 | |
| Tipping load | 283 | Environmental temperature (℃) | -15~45 | |
| Maximum breakout force | 290 | Water wading depth (mm) | 520 | |
| Forward I | 0～10.4 km/h | Forward Ⅱ(km/h) | 0～30.7 km/h | |
| Forward Ⅲ(km/h) | - | Forward Ⅳ(km/h) | - | |
| Reverse I (km/h) | 0～13.3 km/h | Reverse II | - | |
| Reverse III | - | Reverse IV | - | |
| 2.Dimension | ||||
| Overall length (mm) | 9210 | Overall width (mm) | 3025 | |
| Outside width of wheel | 3025 mm | Wheel track | - | |
| Overall height (mm) | 3480 | wheelbase（mm） | 3800 | |
| Dumping angle | - | Maximum dumping height | - | |
| Number of axles | 2 | Corresponding dump reach | - | |
| Maximum lifting height of fork horizontal section (mm) | 3540 | Total mass (kg) | 29000 | |
| Minimum ground clearance | 460 | Axis pin at maximum lift height | 3990 | |
| Wheelbase (front/rear) (mm) | 3800(2025/1775) | - | - | |
| 3.Engine | ||||
| Engine model/Drive Motor Model | WP10G240E341 | Number of cylinders | 6 | |
| Engine type | In-line、 water-cooled、 dry sleeve、 direct injection | Bore/stroke | 126/130 mm | |
| Engine power (KW) | 178 | Minimum fuel consumption | ≤210 g/kW.h | |
| Rated engine speed | 2200 (r/min) | Maximum torque (N.m)/rotation speed (r/min) | 1100/1500 | |
| Displacement (ml) | 9726 | Emission standard | GB 20891-2014（China Ⅲ emission） | |
| 4.Transmission system | ||||
| Type of torque converter | Single-stage four-element twin turbine torque converter | Torque ratio | 4.0 | |
| Oil cooling mode | Circulating water cooling | Oil pressure of torque converter inlet | 0.5～0.6 MPa | |
| Oil pressure of torque converter outlet | 0.21～0.26 MPa | Transmission type | Planetary power shift | |
| Shifting gears | forward 2 reverse 1 | Gear ratio of forward I | 3.117 | |
| Gear ratio of forward Ⅱ | 0.836 | Gear ratio of forward Ⅲ | - | |
| Gear ratio of forward Ⅳ | - | Gear ratio of reverse I | 2.281 | |
| Gear ratio of reverse II | - | Gear ratio of reverse III | - | |
| Gear ratio of reverse IV | - | Model of variable-speed pump | LG03-BSB-A | |
| Working pressure of shifting | 1.1～1.5 MPa | Main drive type | First reduction of spiral bevel gear | |
| Main drive reduction ratio | 4.625 | Wheel reduction type | One-stage planetary reduction | |
| Wheel reduction ratio | 5.6 | Drive type | CHANGCHAI four-wheel drive | |
| Tyre size | 26.5-25 | Front tyre pressure | 0.5±0.01 | |
| Rear tyre pressure | 0.4±0.01 | Type of foot brake | Air-over-oil caliper disc brake | |
| Brake pressure (MPa) | 0.784 MPa | Parking brake type | Electric air-controlled caliper disc brake | |
| 5.Steering system | ||||
| Type of steering system | Load-sensing full hydraulic articulated steering | Model of priority valve | VLH-240 | |
| Steering pump model | Twin pump 112/10 | Steering cylinder - bore x rod diameter x stroke | HSGL-100×55×450-900 | |
| Steering gear model | BZZ8-940 | Steering angle (°) | 35 | |
| Working pressure of steering system | 21 MPa | - | - | |
| 6.Working equipment | ||||
| Type of working device | Hydraulic pilot control | Boom cylinder - bore × rod diameter × stroke | HSGF-180×90×1176-581 | |
| Turning bucket cylinder - bore x rod diameter x stroke | HSGF-165×90×745-1418 | Model of working pump | Single pump 100 | |
| Displacement of working pump (ml/r) | 80 | Model of multi-way valve | KM300-II-20A | |
| Model of pilot valve | PCL403-35-B | Working pressure of working device hydraulic system | 21 MPa | |
| Bucket lift time (full load) | 9.64 | Bucket fall time (no load) | 6.7 | |
| Bucket dumping time (no load) | 4.2 | Time sum of three items | 20.54 | |
| 7. Oil filling amount | ||||
| Diesel filling capacity of fuel tank | 260 L | Oil filling capacity of axles (main drive and wheel reducer) | 44L+34L | |
| Oil tank filling capacity | 210 L | Engine oil filling capacity | 20 L | |
| Transmission oil filling capacity | 44 L | Refueling of antifreeze coolant | 24 | |
| Oil filling capacity of braking system | 4 L | - | - | |
Benefits & Features
1，Rated bucket capacity：The machine boasts a substantial rated bucket capacity of 7240 kg, indicating its ability to handle significant loads effectively.
2，Maximum traction force：With a maximum traction force of 195 kN, the equipment is capable of performing in challenging conditions with high traction requirements.
3，Engine power：Equipped with a powerful WP10G240E341 engine delivering 178 kW, the machine can handle heavy-duty tasks with ease.
4，Engine emission standard：Adhering to the GB 20891-2014 (China III emission) standard, the engine is environmentally friendly and complies with stringent emission regulations.
5，Transmission system：Featuring a single-stage four-element twin turbine torque converter and a planetary power shift transmission, the system ensures smooth and efficient gear changes.
6，Steering system：The load-sensing full hydraulic articulated steering system with a steering angle of 35 degrees provides excellent maneuverability and control.
7，Working device hydraulic system：A hydraulic pilot control working device with a working pressure of 21 MPa ensures precise and powerful operation of the hydraulic systems.
8，Tyre size and pressure：The 26.5-25 tyre size combined with specific front and rear tyre pressures (0.5±0.01 and 0.4±0.01 respectively) contributes to optimal traction and stability.
9，Brake system：An air-over-oil caliper disc brake and an electric air-controlled caliper disc parking brake provide reliable stopping power and safety.
10，Oil filling amounts：The comprehensive oil filling capacities for the fuel tank, axle, oil tank, engine, transmission, and braking system ensure the machine is well-maintained and operates efficiently.
RELATED PRODUCTS
ONLINE MESSAGE
* Note: Please be sure to fill in the information accurately and keep the communication open. We will get in touch with you as soon as possible
Warehouse: No:124 A7 lunda International city Hedong DIstrict Linyi CHINA FACTORY:100# The East of the Crossing of VOLVO Str& SDLG Str Linyi Shandong PR.CHINA
Headquarters: A1402 Kaiyuanshangcheng,Lanshan District,Linyi City Shandong Province,PR. China 276000